Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included

 1 in stock

Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments

Homologated for road use.

Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems

 1 in stock

Lightweight folding Tarozzi aluminium pillion footrest on zinc finish steel bracket footpeg. Footpeg is hollow with rubber Sleeve. Supplied with nyloc nut and washer.

A great way to tidy up the pillion footrests on your project bike

 Availability varies on this part, check availability

 01163620 GU01163620 01 16 36 20
 0116 3620 0116.3620 01.16.36.20

Knurled aluminium folding riders footpeg, suitable for Tarozzi rearsets and as an upgrade for standard footrests

Folding footrest

 Sorry, this part is no longer available.

Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube

38mm rise

 Sorry, this part is no longer available.

Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube

38mm rise

 Sorry, this part is no longer available.

S&B air filter. Chromed back, includes clip

This K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits PHBH 30, PHBH 28 and VHB 30 Dellorto carbs. See SIA00055 if you require a shorter but larger diameter filter. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of triangular side panels with fixings to fit all Tonti frame models with slotted side panel lugs under the seat

This is a kit, the fixings need bending and glueing to the sidepanel before the side panels can be fitted. The panels are GRP, fitting instructions are provided in German

 This part is available by special order, request a quote

Complete round 203mm left hand dip (UK spec) headlight unit with bulb. Black body with chrome rim.

Due to the scarcity of LH dip Italian made headlights we have sourced this reasonably priced alternative which is similar in size to the headlamp used on V50 and T3 models. Supplied complete with headlight bulb. Headlamp is slightly larger than stock so some repositioning of the headlamp brackets may be required. Please note there is no pilot light with this headlamp and thread size for bolt fixing holes is M8. This is a smaller thread than the M10 thread on T3 indicator stems.

 This part is available by special order, request a quote

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

• Reduction in flywheel and clutch weight of approx. 1KG
• Improved acceleration
• Smoother gear changes at high RPM
• Quicker engine decelleration
• Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
• Lighter handlebar clutch lever action
• More precise clutch engagement and disengagement.
• More progressive clutch engagement.
• Increased ability to handle higher torque and horsepower.
• Lower clutch disk wear (reduced maintenance)
• Fewer parts (no intermediate plate, no second friction plate) to wear out
• Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

 This part is due back in stock soon, call 01484 841395 to reserve yours